Airman’s $15 invention could save the Air Force millions
 

Airman’s $15 invention could save the Air Force millions
By: Christopher Dennis - Stars & Stripes 03-05-20
Re: https://www.stripes.com/news/europe/...lions-1.621344

Photo link: https://www.stripes.com/polopoly_fs/..._900/image.jpg
Staff Sgt. Patrick Leach, 100th Maintenance Squadron aircraft fuels systems craftsman, uses the pressurized leak detection cup he designed at RAF Mildenhall, England, on Feb. 14, 2020. The device costs $15 to make and has reduced the time needed to detect leaks in fuel tanks by 75%. - JOSEPH BARRON/U.S. AIR FORCE

RAF MILDENHALL, England — A $15 tool developed by an airman at RAF Mildenhall could save the Air Force millions of dollars a year by greatly reducing the time needed to find fuel tank leaks.

The 3D printed, pressurized leak detection cup developed by Staff Sgt. Patrick Leach decreases by up to 75% the time it takes to detect leaks in fuel tanks, the 100th Air Refueling Wing said in a statement.

The new tool has been authorized for use on KC-135 refueler aircraft at RAF Mildenhall, where it’s estimated it will save $1.5 million a year in man hours.

Photo Gallery: https://www.stripes.com/polopoly_fs/..._900/image.jpg
The Pressurized Leak Detection Cup sits on a table Feb. 14, 2020, at RAF Mildenhall, England. Designed by Air Force Staff Sgt. Patrick Leach of the 100th Maintenance Squadron, the device reduces the time needed to detect leaks in the fuel tanks of KC-135 Stratotankers from eight to 12 hours, to about four hours. JOSEPH BARRON/U.S. AIR FORCE

It works like a “reverse tire leak check by sealing the area where a leak might be, and pushing air back up the pathway to cause bubbles and foam inside the fuel tank where the leak is,” Leach said in an interview Tuesday.

It cuts to about four hours the time it takes to find a leak, Leach said. Previously, it took eight to 12 hours and involved one airman spraying the outside of the aircraft with an air hose. Another airman wearing a respirator would be inside the tank, watching for bubbles or foam to form, indicating a leak.

The airman who had to crawl inside the fuel tank would “smell like fuel for a week,” Leach said.

The tool has been tested on a fuel cell trainer and in simulated environments since September, said fuel systems section chief Master Sgt. Jonathan Harper.

Besides Mildenhall’s KC-135s, Leach’s invention is being considered for use on other aircraft at U.S. bases across Europe, the 100th Air Refueling Wing statement said.

“The ultimate goal is to be able to shape this to any aircraft, even if the wing has a weird design or angles or small areas,” Leach said.

-----------------------------------------------------------------------------------------------------

Personal note: Ingenuity also called the K.I.S.S. Principle (keep it simple stupid) works even in the overly engineered products. He will get another rank and a pat on the back and then told to get back to work. It goes to show practicality doesn't cost an arm and a leg. Overkill is very costly. Good Job Sgt.

Boats