David
Thu December 19, 2002 2:49pm
|
Secretary of the Army Tho
Secretary of the Army Thomas E. White (left) talks with Unmanned Aerial vehicle operator Spc. Frank Konarik (right), Company A, 104th Military Intelligence Battalion, Fort Hood, Texas yesterday as Konarik demonstrates the capabilities of a Shadow 200 Tactical Unmanned Aerial Vehicle flying above Fort Hood.
|
|
David
Thu December 19, 2002 3:07pm
|
The Secretary of the Army
The Secretary of the Army Thomas E. White presents an award to Sandy Schwartz for her years of service to the military as her husband Gen. Thomas Schwartz looks on. Gen. Schwartz was retired June 25, 2002 during a ceremony at Fort Hood, Texas, after 35 years of service.
|
|
David
Fri January 10, 2003 10:58pm
|
Hood, Gen. John B.; bust-
Hood, Gen. John B.; bust-length, in civilian clothes.
|
|
David
Fri March 21, 2003 6:21am
|
Joint Service Lightweight
The Joint Service Lightweight Integrated Suit Technology or JSLIST consists of a two piece garment designed to replace the Navy's existing Chemical Protection Overgarment (CPO). The JSLIST garment offers a number of advantages over the Navy' s current CPO. The JSLIST garment features state-of-the-art chemical protective lining technology which provides increased chemical protection while allowing more mobility for the wearer, and can be laundered up to three times. The CPO suit contains a charcoal impregnated lining. During wear, this lining is leached onto the wearer causing inner garments to become coated with charcoal dust. The CPO suit would disintegrate if laundered.
In 1993 the U.S. Marine Corps Systems Command, the U.S. Army Aviation and Troop Command, the U.S. Naval Sea Systems Command and the U.S. Air Force Material Command signed a Memorandum of Agreement establishing the JSLIST Program. The program combined development and testing efforts resulting in the procurement of a single U.S. military CBR Garment at a significantly reduced cost.
The U.S. Army Natick Soldier Systems Center is participating in the management, design and development of the next generation chemical/biological protective clothing system. Key requirements of the JSLIST program included protection against chemical/biological agents, a lighter weight, more flexible garment, and the ability to be laundered. Key requirements of the footwear include combined environmental and CB protection, POL resistance, and self flame extinguishing characteristics. In addition, the system is required to be durable, designed to take into account the human factors of (and acceptability to) the user, and reduce the heat stress associated with protective gear.
JSLIST consolidates service programs to develop next generation chemical/biological protective clothing systems into common goal objectives: obtain the best suit possible at the least cost; minimize types of suits in service; maximize economies of scale; and conserve service resources. JSLIST created an avenue for new, potential candidate chemical protective material technologies/prototype ensembles to be evaluated for technical merit and performance. This process screened potential technologies for inclusion into future advanced development programs.
Description:
Components include an Overgarment to be worn over the Battle Dress Uniform (BDU), and the Multipurpose Rain / Snow / CB Overboot (MULO). These items allow complete MOPP and heat stress management flexibility while tailoring the protection levels relative to mission scenarios and threat. Procurement of these items began in FY97.
The JSLIST program developed and is fielding the JSLIST Overgarment and is manufacturing Multi-purpose Overboots (MULO). The JSLIST Overgarment and the Multipurpose Overboot (MULO) were adopted by all four services. These items, when combined with standard CB protective butyl gloves and masks for respiratory protection, allow complete MOPP flexibility. The Joint Firefighter Integrated Response Ensemble (J-FIRE) will also utilize the JSLIST overgarment.
The JSLIST overgarment is designed to replace the Battle Dress Overgarment, the USMC Saratoga, and the Navy Chemical Protective Overgarment. It is lighter and less bulky than the previous Battle Dress Overgarment (BDO) chemical protective garments, is durable for 45 days, can be laundered up to six times and provides 24 hours of protection against liquid and vapor chemical challenges. The overgarment consists of a coat and trousers. The trousers have bellows-type pockets, high-waist, adjustable suspenders, and adjustable waistband. The trousers also have a slide fastener front opening with protective flap and a bellows pocket with flap located on each thigh. Each leg opening has two hook and loop ankle adjustment tabs. The waist-length coat has an integral hood, a slide fastener front concealed by a flap with hook and loop closure, enclosed extendable elasticized drawcord hem with jacket retention cord, full-length sleeves with hoop and loop wrist closure adjustment tabs, and an outside bellows pocket with flap on the left sleeve. The outer shell of both pieces is a 50/50 nylon/cotton poplin ripstop with a durable water repellent finish. The liner layer consists of a nonwoven front laminated to activated carbon spheres and bonded to a tricot knit back. Garments are being procured in 4-color Woodland Camouflage or 3-color Desert Camouflage patterns.
Component Materials: The outer shell is a 50/50 nylon/cotton poplin ripstop with a durable water repellent finish. The liner layer consists of a nonwoven front laminated to activated carbon spheres and bonded to a tricot knit back.
Color: The outer layer is a 40 color Woodland Camouflage pattern or a 3-color Desert Camouflage pattern.
Weight: 2.63 kg (5.8 lbs) per overgarment (Med/Reg)
Size: Coat, 7 sizes, Small/X-Short through Large/Long; Trousers, 7 sizes, Small/X-Short through Large/Long
Basis of Issue: The overgarment will be issued to troops requiring chemical protection.
Price: Coat, Med/Reg $91.80; Trousers, Med/Reg $91.80
NSN: Coat, Med/Reg 8415-01-444-2310; Trousers, Med/Reg 8415-01-444-1238
The JSLIST suit has a five-year shelf life, with an estimated total life of 15 years. Once a production lot of suits has reached five years of age, samples from that lot are visually inspected and chemical agent tested to determine whether the shelf life of that lot should be extended an additional five years with sound confidence of quality / durability. Once the suit reaches ten years of service life it is chemical tested, inspected, and if qualified, is extended annually thereafter. Equipment Assessment Program personnel will perform the visual inspection. The chemical testing will be performed by the Battelle Memorial Institute. Inspection and testing of the JSLIST suits will begin in FY02 (first five year period) for shelf life extension. Representative samples from FY97 production lots will be inspected at that time.
JSLIST suits in packages with some loss of vacuum, but no clearly visible holes or tears, are considered fully mission-capable. If a bag is opened or accidentally torn, and has not been exposed to any petroleum, oil, or lubricant (POL) products or possible contaminants and not damaged in any way, it can be immediately re-packaged or carefully repaired with high quality adhesive tape, "duct tape", or some similar product to re-create the seal, and it will maintain its original shelf life. Repair procedures to the inner bag should not obliterate surveillance data. If a package is visibly torn or punctured with no determination as to when it was damaged or to what contaminants the suit was exposed, the suit should be used for training only. The words training only must be stenciled 2.5 inches high or larger on the outside of a sleeve or leg of the item, in a contrasting colored permanent ink.
The Multi-purpose Overboots (MULO) will replace the black vinyl overboot/ green vinyl overboot (BVO/GVO). The MULO is a 60 day boot that provides 24 hours of chemical protection. The boot has increased traction, improved durability, petroleum, oil, and lubricant (POL) and flame resistance, and better chemical protection than the BVO/GVO.
The focus of Joint Service Lightweight Integrated Suit Technology Pre-Planned Product Improvement (JSLIST P3I) is to leverage Industry for mature fabric technologies for use in garments. The existing JSLIST design will be used as the baseline, with minimum modification as necessary for improvement. Mature fabric technologies and designs for gloves and socks will be sought as well to address the glove and sock requirements that were not met in JSLIST.
A market survey was conducted in FY97. Materials received from responding forms were evaluated, and material screening was scheduled to be completed in 4FQ98. Field evaluation was projected to start 1QFY99, and technology insertion in 1QFY00.
The JSLIST P3I is a follow-on to the existing JSLIST program which developed a joint service chemical protective ensemble. It will address the JSLIST objectives (i.e. desired) requirements and those that were not met. This joint program will include full participation by the US Air Force, Army, Marine Corps, and Navy.
The JSLIST Block 1 Glove Upgrade (JB1GU) Program is seeking an interim glove to replace the current butyl rubber glove. The follow on to the JB1GU will be the JB2GU program that will be produce gloves for both ground and aviation units. The Joint Protective Aircrew Ensemble (JPACE) will be developed to provide aviators with the same advantages and improved protection as JSLIST provides to other warfighters. Similarly, clothing systems for Explosive Ordnance Disposal (EOD) personnel and firefighters are required to enhance existing chemical protection systems.
In an attempt to encourage competition and lower costs, the Joint Service Lightweight Integrated Suit Technology (JSLIST) program solicited in 4QFY00 for JSLIST overgarments in alternate materials, but having the exact same design as the original JSLIST. The purpose of the JSLIST Additional Source Qualification (JASQ) program is to qualify additional manufacturers to provide JSLIST overgarments. Manufacturers could also submit Industry Initiated Demonstration Products (IIDP) in alternate materials that might require a different design. These though will be evaluated for potential use in future garments and can not be qualified for use as a substitute JSLIST overgarment. After release of Request for Proposal in FY00, four candidate materials and two IIDP candidates were received. All have completed field-testing at 29 Palms, Cold Regions Test Center, and Tropic Test Center 4QFY01 – 2QFY02. Due to funding shortfalls, chemical agent swatch testing has been postponed until 1QFY03. Upon completion of agent testing, the candidates will be evaluated for inclusion on the Qualified Products List (QPL).
Suit shortages are projected to escalate in the next few years because the majority of suits in the current inventory will reach the end of their useful life and expire by 2007, and new Joint Service Lightweight Integrated Suit Technology (JSLIST) suits, along with other new generation protective ensemble components such as gloves and boots, are not entering the inventory as quickly as originally planned. Consequently, the old suits are expiring faster than they are being replaced.
Some ensemble components, particularly suits, may not be available in adequate numbers to meet near-term minimum requirements. As of August 30, 2002, DOD had procured about 1.5 million of the new JSLIST suits, of which the majority were issued to the military services. Others are held in Defense Logistics Agency reserves, provided to foreign governments under the Foreign Military Sales program, or allocated to domestic uses. Together with the existing inventory of earlier-generation suits, it was estimated that DOD had a total of 4.5 million suits.
|
|
David
Fri March 21, 2003 6:25am
Rating: 10
|
Joint Service Lightweight
The Joint Service Lightweight Integrated Suit Technology or JSLIST consists of a two piece garment designed to replace the Navy's existing Chemical Protection Overgarment (CPO). The JSLIST garment offers a number of advantages over the Navy' s current CPO. The JSLIST garment features state-of-the-art chemical protective lining technology which provides increased chemical protection while allowing more mobility for the wearer, and can be laundered up to three times. The CPO suit contains a charcoal impregnated lining. During wear, this lining is leached onto the wearer causing inner garments to become coated with charcoal dust. The CPO suit would disintegrate if laundered.
In 1993 the U.S. Marine Corps Systems Command, the U.S. Army Aviation and Troop Command, the U.S. Naval Sea Systems Command and the U.S. Air Force Material Command signed a Memorandum of Agreement establishing the JSLIST Program. The program combined development and testing efforts resulting in the procurement of a single U.S. military CBR Garment at a significantly reduced cost.
The U.S. Army Natick Soldier Systems Center is participating in the management, design and development of the next generation chemical/biological protective clothing system. Key requirements of the JSLIST program included protection against chemical/biological agents, a lighter weight, more flexible garment, and the ability to be laundered. Key requirements of the footwear include combined environmental and CB protection, POL resistance, and self flame extinguishing characteristics. In addition, the system is required to be durable, designed to take into account the human factors of (and acceptability to) the user, and reduce the heat stress associated with protective gear.
JSLIST consolidates service programs to develop next generation chemical/biological protective clothing systems into common goal objectives: obtain the best suit possible at the least cost; minimize types of suits in service; maximize economies of scale; and conserve service resources. JSLIST created an avenue for new, potential candidate chemical protective material technologies/prototype ensembles to be evaluated for technical merit and performance. This process screened potential technologies for inclusion into future advanced development programs.
Description:
Components include an Overgarment to be worn over the Battle Dress Uniform (BDU), and the Multipurpose Rain / Snow / CB Overboot (MULO). These items allow complete MOPP and heat stress management flexibility while tailoring the protection levels relative to mission scenarios and threat. Procurement of these items began in FY97.
The JSLIST program developed and is fielding the JSLIST Overgarment and is manufacturing Multi-purpose Overboots (MULO). The JSLIST Overgarment and the Multipurpose Overboot (MULO) were adopted by all four services. These items, when combined with standard CB protective butyl gloves and masks for respiratory protection, allow complete MOPP flexibility. The Joint Firefighter Integrated Response Ensemble (J-FIRE) will also utilize the JSLIST overgarment.
The JSLIST overgarment is designed to replace the Battle Dress Overgarment, the USMC Saratoga, and the Navy Chemical Protective Overgarment. It is lighter and less bulky than the previous Battle Dress Overgarment (BDO) chemical protective garments, is durable for 45 days, can be laundered up to six times and provides 24 hours of protection against liquid and vapor chemical challenges. The overgarment consists of a coat and trousers. The trousers have bellows-type pockets, high-waist, adjustable suspenders, and adjustable waistband. The trousers also have a slide fastener front opening with protective flap and a bellows pocket with flap located on each thigh. Each leg opening has two hook and loop ankle adjustment tabs. The waist-length coat has an integral hood, a slide fastener front concealed by a flap with hook and loop closure, enclosed extendable elasticized drawcord hem with jacket retention cord, full-length sleeves with hoop and loop wrist closure adjustment tabs, and an outside bellows pocket with flap on the left sleeve. The outer shell of both pieces is a 50/50 nylon/cotton poplin ripstop with a durable water repellent finish. The liner layer consists of a nonwoven front laminated to activated carbon spheres and bonded to a tricot knit back. Garments are being procured in 4-color Woodland Camouflage or 3-color Desert Camouflage patterns.
Component Materials: The outer shell is a 50/50 nylon/cotton poplin ripstop with a durable water repellent finish. The liner layer consists of a nonwoven front laminated to activated carbon spheres and bonded to a tricot knit back.
Color: The outer layer is a 40 color Woodland Camouflage pattern or a 3-color Desert Camouflage pattern.
Weight: 2.63 kg (5.8 lbs) per overgarment (Med/Reg)
Size: Coat, 7 sizes, Small/X-Short through Large/Long; Trousers, 7 sizes, Small/X-Short through Large/Long
Basis of Issue: The overgarment will be issued to troops requiring chemical protection.
Price: Coat, Med/Reg $91.80; Trousers, Med/Reg $91.80
NSN: Coat, Med/Reg 8415-01-444-2310; Trousers, Med/Reg 8415-01-444-1238
The JSLIST suit has a five-year shelf life, with an estimated total life of 15 years. Once a production lot of suits has reached five years of age, samples from that lot are visually inspected and chemical agent tested to determine whether the shelf life of that lot should be extended an additional five years with sound confidence of quality / durability. Once the suit reaches ten years of service life it is chemical tested, inspected, and if qualified, is extended annually thereafter. Equipment Assessment Program personnel will perform the visual inspection. The chemical testing will be performed by the Battelle Memorial Institute. Inspection and testing of the JSLIST suits will begin in FY02 (first five year period) for shelf life extension. Representative samples from FY97 production lots will be inspected at that time.
JSLIST suits in packages with some loss of vacuum, but no clearly visible holes or tears, are considered fully mission-capable. If a bag is opened or accidentally torn, and has not been exposed to any petroleum, oil, or lubricant (POL) products or possible contaminants and not damaged in any way, it can be immediately re-packaged or carefully repaired with high quality adhesive tape, "duct tape", or some similar product to re-create the seal, and it will maintain its original shelf life. Repair procedures to the inner bag should not obliterate surveillance data. If a package is visibly torn or punctured with no determination as to when it was damaged or to what contaminants the suit was exposed, the suit should be used for training only. The words training only must be stenciled 2.5 inches high or larger on the outside of a sleeve or leg of the item, in a contrasting colored permanent ink.
The Multi-purpose Overboots (MULO) will replace the black vinyl overboot/ green vinyl overboot (BVO/GVO). The MULO is a 60 day boot that provides 24 hours of chemical protection. The boot has increased traction, improved durability, petroleum, oil, and lubricant (POL) and flame resistance, and better chemical protection than the BVO/GVO.
The focus of Joint Service Lightweight Integrated Suit Technology Pre-Planned Product Improvement (JSLIST P3I) is to leverage Industry for mature fabric technologies for use in garments. The existing JSLIST design will be used as the baseline, with minimum modification as necessary for improvement. Mature fabric technologies and designs for gloves and socks will be sought as well to address the glove and sock requirements that were not met in JSLIST.
A market survey was conducted in FY97. Materials received from responding forms were evaluated, and material screening was scheduled to be completed in 4FQ98. Field evaluation was projected to start 1QFY99, and technology insertion in 1QFY00.
The JSLIST P3I is a follow-on to the existing JSLIST program which developed a joint service chemical protective ensemble. It will address the JSLIST objectives (i.e. desired) requirements and those that were not met. This joint program will include full participation by the US Air Force, Army, Marine Corps, and Navy.
The JSLIST Block 1 Glove Upgrade (JB1GU) Program is seeking an interim glove to replace the current butyl rubber glove. The follow on to the JB1GU will be the JB2GU program that will be produce gloves for both ground and aviation units. The Joint Protective Aircrew Ensemble (JPACE) will be developed to provide aviators with the same advantages and improved protection as JSLIST provides to other warfighters. Similarly, clothing systems for Explosive Ordnance Disposal (EOD) personnel and firefighters are required to enhance existing chemical protection systems.
In an attempt to encourage competition and lower costs, the Joint Service Lightweight Integrated Suit Technology (JSLIST) program solicited in 4QFY00 for JSLIST overgarments in alternate materials, but having the exact same design as the original JSLIST. The purpose of the JSLIST Additional Source Qualification (JASQ) program is to qualify additional manufacturers to provide JSLIST overgarments. Manufacturers could also submit Industry Initiated Demonstration Products (IIDP) in alternate materials that might require a different design. These though will be evaluated for potential use in future garments and can not be qualified for use as a substitute JSLIST overgarment. After release of Request for Proposal in FY00, four candidate materials and two IIDP candidates were received. All have completed field-testing at 29 Palms, Cold Regions Test Center, and Tropic Test Center 4QFY01 – 2QFY02. Due to funding shortfalls, chemical agent swatch testing has been postponed until 1QFY03. Upon completion of agent testing, the candidates will be evaluated for inclusion on the Qualified Products List (QPL).
Suit shortages are projected to escalate in the next few years because the majority of suits in the current inventory will reach the end of their useful life and expire by 2007, and new Joint Service Lightweight Integrated Suit Technology (JSLIST) suits, along with other new generation protective ensemble components such as gloves and boots, are not entering the inventory as quickly as originally planned. Consequently, the old suits are expiring faster than they are being replaced.
Some ensemble components, particularly suits, may not be available in adequate numbers to meet near-term minimum requirements. As of August 30, 2002, DOD had procured about 1.5 million of the new JSLIST suits, of which the majority were issued to the military services. Others are held in Defense Logistics Agency reserves, provided to foreign governments under the Foreign Military Sales program, or allocated to domestic uses. Together with the existing inventory of earlier-generation suits, it was estimated that DOD had a total of 4.5 million suits.
|
|
David
Fri March 21, 2003 6:25am
|
Joint Service Lightweight
The Joint Service Lightweight Integrated Suit Technology or JSLIST consists of a two piece garment designed to replace the Navy's existing Chemical Protection Overgarment (CPO). The JSLIST garment offers a number of advantages over the Navy' s current CPO. The JSLIST garment features state-of-the-art chemical protective lining technology which provides increased chemical protection while allowing more mobility for the wearer, and can be laundered up to three times. The CPO suit contains a charcoal impregnated lining. During wear, this lining is leached onto the wearer causing inner garments to become coated with charcoal dust. The CPO suit would disintegrate if laundered.
In 1993 the U.S. Marine Corps Systems Command, the U.S. Army Aviation and Troop Command, the U.S. Naval Sea Systems Command and the U.S. Air Force Material Command signed a Memorandum of Agreement establishing the JSLIST Program. The program combined development and testing efforts resulting in the procurement of a single U.S. military CBR Garment at a significantly reduced cost.
The U.S. Army Natick Soldier Systems Center is participating in the management, design and development of the next generation chemical/biological protective clothing system. Key requirements of the JSLIST program included protection against chemical/biological agents, a lighter weight, more flexible garment, and the ability to be laundered. Key requirements of the footwear include combined environmental and CB protection, POL resistance, and self flame extinguishing characteristics. In addition, the system is required to be durable, designed to take into account the human factors of (and acceptability to) the user, and reduce the heat stress associated with protective gear.
JSLIST consolidates service programs to develop next generation chemical/biological protective clothing systems into common goal objectives: obtain the best suit possible at the least cost; minimize types of suits in service; maximize economies of scale; and conserve service resources. JSLIST created an avenue for new, potential candidate chemical protective material technologies/prototype ensembles to be evaluated for technical merit and performance. This process screened potential technologies for inclusion into future advanced development programs.
Description:
Components include an Overgarment to be worn over the Battle Dress Uniform (BDU), and the Multipurpose Rain / Snow / CB Overboot (MULO). These items allow complete MOPP and heat stress management flexibility while tailoring the protection levels relative to mission scenarios and threat. Procurement of these items began in FY97.
The JSLIST program developed and is fielding the JSLIST Overgarment and is manufacturing Multi-purpose Overboots (MULO). The JSLIST Overgarment and the Multipurpose Overboot (MULO) were adopted by all four services. These items, when combined with standard CB protective butyl gloves and masks for respiratory protection, allow complete MOPP flexibility. The Joint Firefighter Integrated Response Ensemble (J-FIRE) will also utilize the JSLIST overgarment.
The JSLIST overgarment is designed to replace the Battle Dress Overgarment, the USMC Saratoga, and the Navy Chemical Protective Overgarment. It is lighter and less bulky than the previous Battle Dress Overgarment (BDO) chemical protective garments, is durable for 45 days, can be laundered up to six times and provides 24 hours of protection against liquid and vapor chemical challenges. The overgarment consists of a coat and trousers. The trousers have bellows-type pockets, high-waist, adjustable suspenders, and adjustable waistband. The trousers also have a slide fastener front opening with protective flap and a bellows pocket with flap located on each thigh. Each leg opening has two hook and loop ankle adjustment tabs. The waist-length coat has an integral hood, a slide fastener front concealed by a flap with hook and loop closure, enclosed extendable elasticized drawcord hem with jacket retention cord, full-length sleeves with hoop and loop wrist closure adjustment tabs, and an outside bellows pocket with flap on the left sleeve. The outer shell of both pieces is a 50/50 nylon/cotton poplin ripstop with a durable water repellent finish. The liner layer consists of a nonwoven front laminated to activated carbon spheres and bonded to a tricot knit back. Garments are being procured in 4-color Woodland Camouflage or 3-color Desert Camouflage patterns.
Component Materials: The outer shell is a 50/50 nylon/cotton poplin ripstop with a durable water repellent finish. The liner layer consists of a nonwoven front laminated to activated carbon spheres and bonded to a tricot knit back.
Color: The outer layer is a 40 color Woodland Camouflage pattern or a 3-color Desert Camouflage pattern.
Weight: 2.63 kg (5.8 lbs) per overgarment (Med/Reg)
Size: Coat, 7 sizes, Small/X-Short through Large/Long; Trousers, 7 sizes, Small/X-Short through Large/Long
Basis of Issue: The overgarment will be issued to troops requiring chemical protection.
Price: Coat, Med/Reg $91.80; Trousers, Med/Reg $91.80
NSN: Coat, Med/Reg 8415-01-444-2310; Trousers, Med/Reg 8415-01-444-1238
The JSLIST suit has a five-year shelf life, with an estimated total life of 15 years. Once a production lot of suits has reached five years of age, samples from that lot are visually inspected and chemical agent tested to determine whether the shelf life of that lot should be extended an additional five years with sound confidence of quality / durability. Once the suit reaches ten years of service life it is chemical tested, inspected, and if qualified, is extended annually thereafter. Equipment Assessment Program personnel will perform the visual inspection. The chemical testing will be performed by the Battelle Memorial Institute. Inspection and testing of the JSLIST suits will begin in FY02 (first five year period) for shelf life extension. Representative samples from FY97 production lots will be inspected at that time.
JSLIST suits in packages with some loss of vacuum, but no clearly visible holes or tears, are considered fully mission-capable. If a bag is opened or accidentally torn, and has not been exposed to any petroleum, oil, or lubricant (POL) products or possible contaminants and not damaged in any way, it can be immediately re-packaged or carefully repaired with high quality adhesive tape, "duct tape", or some similar product to re-create the seal, and it will maintain its original shelf life. Repair procedures to the inner bag should not obliterate surveillance data. If a package is visibly torn or punctured with no determination as to when it was damaged or to what contaminants the suit was exposed, the suit should be used for training only. The words training only must be stenciled 2.5 inches high or larger on the outside of a sleeve or leg of the item, in a contrasting colored permanent ink.
The Multi-purpose Overboots (MULO) will replace the black vinyl overboot/ green vinyl overboot (BVO/GVO). The MULO is a 60 day boot that provides 24 hours of chemical protection. The boot has increased traction, improved durability, petroleum, oil, and lubricant (POL) and flame resistance, and better chemical protection than the BVO/GVO.
The focus of Joint Service Lightweight Integrated Suit Technology Pre-Planned Product Improvement (JSLIST P3I) is to leverage Industry for mature fabric technologies for use in garments. The existing JSLIST design will be used as the baseline, with minimum modification as necessary for improvement. Mature fabric technologies and designs for gloves and socks will be sought as well to address the glove and sock requirements that were not met in JSLIST.
A market survey was conducted in FY97. Materials received from responding forms were evaluated, and material screening was scheduled to be completed in 4FQ98. Field evaluation was projected to start 1QFY99, and technology insertion in 1QFY00.
The JSLIST P3I is a follow-on to the existing JSLIST program which developed a joint service chemical protective ensemble. It will address the JSLIST objectives (i.e. desired) requirements and those that were not met. This joint program will include full participation by the US Air Force, Army, Marine Corps, and Navy.
The JSLIST Block 1 Glove Upgrade (JB1GU) Program is seeking an interim glove to replace the current butyl rubber glove. The follow on to the JB1GU will be the JB2GU program that will be produce gloves for both ground and aviation units. The Joint Protective Aircrew Ensemble (JPACE) will be developed to provide aviators with the same advantages and improved protection as JSLIST provides to other warfighters. Similarly, clothing systems for Explosive Ordnance Disposal (EOD) personnel and firefighters are required to enhance existing chemical protection systems.
In an attempt to encourage competition and lower costs, the Joint Service Lightweight Integrated Suit Technology (JSLIST) program solicited in 4QFY00 for JSLIST overgarments in alternate materials, but having the exact same design as the original JSLIST. The purpose of the JSLIST Additional Source Qualification (JASQ) program is to qualify additional manufacturers to provide JSLIST overgarments. Manufacturers could also submit Industry Initiated Demonstration Products (IIDP) in alternate materials that might require a different design. These though will be evaluated for potential use in future garments and can not be qualified for use as a substitute JSLIST overgarment. After release of Request for Proposal in FY00, four candidate materials and two IIDP candidates were received. All have completed field-testing at 29 Palms, Cold Regions Test Center, and Tropic Test Center 4QFY01 – 2QFY02. Due to funding shortfalls, chemical agent swatch testing has been postponed until 1QFY03. Upon completion of agent testing, the candidates will be evaluated for inclusion on the Qualified Products List (QPL).
Suit shortages are projected to escalate in the next few years because the majority of suits in the current inventory will reach the end of their useful life and expire by 2007, and new Joint Service Lightweight Integrated Suit Technology (JSLIST) suits, along with other new generation protective ensemble components such as gloves and boots, are not entering the inventory as quickly as originally planned. Consequently, the old suits are expiring faster than they are being replaced.
Some ensemble components, particularly suits, may not be available in adequate numbers to meet near-term minimum requirements. As of August 30, 2002, DOD had procured about 1.5 million of the new JSLIST suits, of which the majority were issued to the military services. Others are held in Defense Logistics Agency reserves, provided to foreign governments under the Foreign Military Sales program, or allocated to domestic uses. Together with the existing inventory of earlier-generation suits, it was estimated that DOD had a total of 4.5 million suits.
|
|
David
Fri March 21, 2003 6:25am
|
Joint Service Lightweight
The Joint Service Lightweight Integrated Suit Technology or JSLIST consists of a two piece garment designed to replace the Navy's existing Chemical Protection Overgarment (CPO). The JSLIST garment offers a number of advantages over the Navy' s current CPO. The JSLIST garment features state-of-the-art chemical protective lining technology which provides increased chemical protection while allowing more mobility for the wearer, and can be laundered up to three times. The CPO suit contains a charcoal impregnated lining. During wear, this lining is leached onto the wearer causing inner garments to become coated with charcoal dust. The CPO suit would disintegrate if laundered.
In 1993 the U.S. Marine Corps Systems Command, the U.S. Army Aviation and Troop Command, the U.S. Naval Sea Systems Command and the U.S. Air Force Material Command signed a Memorandum of Agreement establishing the JSLIST Program. The program combined development and testing efforts resulting in the procurement of a single U.S. military CBR Garment at a significantly reduced cost.
The U.S. Army Natick Soldier Systems Center is participating in the management, design and development of the next generation chemical/biological protective clothing system. Key requirements of the JSLIST program included protection against chemical/biological agents, a lighter weight, more flexible garment, and the ability to be laundered. Key requirements of the footwear include combined environmental and CB protection, POL resistance, and self flame extinguishing characteristics. In addition, the system is required to be durable, designed to take into account the human factors of (and acceptability to) the user, and reduce the heat stress associated with protective gear.
JSLIST consolidates service programs to develop next generation chemical/biological protective clothing systems into common goal objectives: obtain the best suit possible at the least cost; minimize types of suits in service; maximize economies of scale; and conserve service resources. JSLIST created an avenue for new, potential candidate chemical protective material technologies/prototype ensembles to be evaluated for technical merit and performance. This process screened potential technologies for inclusion into future advanced development programs.
Description:
Components include an Overgarment to be worn over the Battle Dress Uniform (BDU), and the Multipurpose Rain / Snow / CB Overboot (MULO). These items allow complete MOPP and heat stress management flexibility while tailoring the protection levels relative to mission scenarios and threat. Procurement of these items began in FY97.
The JSLIST program developed and is fielding the JSLIST Overgarment and is manufacturing Multi-purpose Overboots (MULO). The JSLIST Overgarment and the Multipurpose Overboot (MULO) were adopted by all four services. These items, when combined with standard CB protective butyl gloves and masks for respiratory protection, allow complete MOPP flexibility. The Joint Firefighter Integrated Response Ensemble (J-FIRE) will also utilize the JSLIST overgarment.
The JSLIST overgarment is designed to replace the Battle Dress Overgarment, the USMC Saratoga, and the Navy Chemical Protective Overgarment. It is lighter and less bulky than the previous Battle Dress Overgarment (BDO) chemical protective garments, is durable for 45 days, can be laundered up to six times and provides 24 hours of protection against liquid and vapor chemical challenges. The overgarment consists of a coat and trousers. The trousers have bellows-type pockets, high-waist, adjustable suspenders, and adjustable waistband. The trousers also have a slide fastener front opening with protective flap and a bellows pocket with flap located on each thigh. Each leg opening has two hook and loop ankle adjustment tabs. The waist-length coat has an integral hood, a slide fastener front concealed by a flap with hook and loop closure, enclosed extendable elasticized drawcord hem with jacket retention cord, full-length sleeves with hoop and loop wrist closure adjustment tabs, and an outside bellows pocket with flap on the left sleeve. The outer shell of both pieces is a 50/50 nylon/cotton poplin ripstop with a durable water repellent finish. The liner layer consists of a nonwoven front laminated to activated carbon spheres and bonded to a tricot knit back. Garments are being procured in 4-color Woodland Camouflage or 3-color Desert Camouflage patterns.
Component Materials: The outer shell is a 50/50 nylon/cotton poplin ripstop with a durable water repellent finish. The liner layer consists of a nonwoven front laminated to activated carbon spheres and bonded to a tricot knit back.
Color: The outer layer is a 40 color Woodland Camouflage pattern or a 3-color Desert Camouflage pattern.
Weight: 2.63 kg (5.8 lbs) per overgarment (Med/Reg)
Size: Coat, 7 sizes, Small/X-Short through Large/Long; Trousers, 7 sizes, Small/X-Short through Large/Long
Basis of Issue: The overgarment will be issued to troops requiring chemical protection.
Price: Coat, Med/Reg $91.80; Trousers, Med/Reg $91.80
NSN: Coat, Med/Reg 8415-01-444-2310; Trousers, Med/Reg 8415-01-444-1238
The JSLIST suit has a five-year shelf life, with an estimated total life of 15 years. Once a production lot of suits has reached five years of age, samples from that lot are visually inspected and chemical agent tested to determine whether the shelf life of that lot should be extended an additional five years with sound confidence of quality / durability. Once the suit reaches ten years of service life it is chemical tested, inspected, and if qualified, is extended annually thereafter. Equipment Assessment Program personnel will perform the visual inspection. The chemical testing will be performed by the Battelle Memorial Institute. Inspection and testing of the JSLIST suits will begin in FY02 (first five year period) for shelf life extension. Representative samples from FY97 production lots will be inspected at that time.
JSLIST suits in packages with some loss of vacuum, but no clearly visible holes or tears, are considered fully mission-capable. If a bag is opened or accidentally torn, and has not been exposed to any petroleum, oil, or lubricant (POL) products or possible contaminants and not damaged in any way, it can be immediately re-packaged or carefully repaired with high quality adhesive tape, "duct tape", or some similar product to re-create the seal, and it will maintain its original shelf life. Repair procedures to the inner bag should not obliterate surveillance data. If a package is visibly torn or punctured with no determination as to when it was damaged or to what contaminants the suit was exposed, the suit should be used for training only. The words training only must be stenciled 2.5 inches high or larger on the outside of a sleeve or leg of the item, in a contrasting colored permanent ink.
The Multi-purpose Overboots (MULO) will replace the black vinyl overboot/ green vinyl overboot (BVO/GVO). The MULO is a 60 day boot that provides 24 hours of chemical protection. The boot has increased traction, improved durability, petroleum, oil, and lubricant (POL) and flame resistance, and better chemical protection than the BVO/GVO.
The focus of Joint Service Lightweight Integrated Suit Technology Pre-Planned Product Improvement (JSLIST P3I) is to leverage Industry for mature fabric technologies for use in garments. The existing JSLIST design will be used as the baseline, with minimum modification as necessary for improvement. Mature fabric technologies and designs for gloves and socks will be sought as well to address the glove and sock requirements that were not met in JSLIST.
A market survey was conducted in FY97. Materials received from responding forms were evaluated, and material screening was scheduled to be completed in 4FQ98. Field evaluation was projected to start 1QFY99, and technology insertion in 1QFY00.
The JSLIST P3I is a follow-on to the existing JSLIST program which developed a joint service chemical protective ensemble. It will address the JSLIST objectives (i.e. desired) requirements and those that were not met. This joint program will include full participation by the US Air Force, Army, Marine Corps, and Navy.
The JSLIST Block 1 Glove Upgrade (JB1GU) Program is seeking an interim glove to replace the current butyl rubber glove. The follow on to the JB1GU will be the JB2GU program that will be produce gloves for both ground and aviation units. The Joint Protective Aircrew Ensemble (JPACE) will be developed to provide aviators with the same advantages and improved protection as JSLIST provides to other warfighters. Similarly, clothing systems for Explosive Ordnance Disposal (EOD) personnel and firefighters are required to enhance existing chemical protection systems.
In an attempt to encourage competition and lower costs, the Joint Service Lightweight Integrated Suit Technology (JSLIST) program solicited in 4QFY00 for JSLIST overgarments in alternate materials, but having the exact same design as the original JSLIST. The purpose of the JSLIST Additional Source Qualification (JASQ) program is to qualify additional manufacturers to provide JSLIST overgarments. Manufacturers could also submit Industry Initiated Demonstration Products (IIDP) in alternate materials that might require a different design. These though will be evaluated for potential use in future garments and can not be qualified for use as a substitute JSLIST overgarment. After release of Request for Proposal in FY00, four candidate materials and two IIDP candidates were received. All have completed field-testing at 29 Palms, Cold Regions Test Center, and Tropic Test Center 4QFY01 – 2QFY02. Due to funding shortfalls, chemical agent swatch testing has been postponed until 1QFY03. Upon completion of agent testing, the candidates will be evaluated for inclusion on the Qualified Products List (QPL).
Suit shortages are projected to escalate in the next few years because the majority of suits in the current inventory will reach the end of their useful life and expire by 2007, and new Joint Service Lightweight Integrated Suit Technology (JSLIST) suits, along with other new generation protective ensemble components such as gloves and boots, are not entering the inventory as quickly as originally planned. Consequently, the old suits are expiring faster than they are being replaced.
Some ensemble components, particularly suits, may not be available in adequate numbers to meet near-term minimum requirements. As of August 30, 2002, DOD had procured about 1.5 million of the new JSLIST suits, of which the majority were issued to the military services. Others are held in Defense Logistics Agency reserves, provided to foreign governments under the Foreign Military Sales program, or allocated to domestic uses. Together with the existing inventory of earlier-generation suits, it was estimated that DOD had a total of 4.5 million suits.
|
|
David
Fri March 21, 2003 6:25am
|
Joint Service Lightweight
The Joint Service Lightweight Integrated Suit Technology or JSLIST consists of a two piece garment designed to replace the Navy's existing Chemical Protection Overgarment (CPO). The JSLIST garment offers a number of advantages over the Navy' s current CPO. The JSLIST garment features state-of-the-art chemical protective lining technology which provides increased chemical protection while allowing more mobility for the wearer, and can be laundered up to three times. The CPO suit contains a charcoal impregnated lining. During wear, this lining is leached onto the wearer causing inner garments to become coated with charcoal dust. The CPO suit would disintegrate if laundered.
In 1993 the U.S. Marine Corps Systems Command, the U.S. Army Aviation and Troop Command, the U.S. Naval Sea Systems Command and the U.S. Air Force Material Command signed a Memorandum of Agreement establishing the JSLIST Program. The program combined development and testing efforts resulting in the procurement of a single U.S. military CBR Garment at a significantly reduced cost.
The U.S. Army Natick Soldier Systems Center is participating in the management, design and development of the next generation chemical/biological protective clothing system. Key requirements of the JSLIST program included protection against chemical/biological agents, a lighter weight, more flexible garment, and the ability to be laundered. Key requirements of the footwear include combined environmental and CB protection, POL resistance, and self flame extinguishing characteristics. In addition, the system is required to be durable, designed to take into account the human factors of (and acceptability to) the user, and reduce the heat stress associated with protective gear.
JSLIST consolidates service programs to develop next generation chemical/biological protective clothing systems into common goal objectives: obtain the best suit possible at the least cost; minimize types of suits in service; maximize economies of scale; and conserve service resources. JSLIST created an avenue for new, potential candidate chemical protective material technologies/prototype ensembles to be evaluated for technical merit and performance. This process screened potential technologies for inclusion into future advanced development programs.
Description:
Components include an Overgarment to be worn over the Battle Dress Uniform (BDU), and the Multipurpose Rain / Snow / CB Overboot (MULO). These items allow complete MOPP and heat stress management flexibility while tailoring the protection levels relative to mission scenarios and threat. Procurement of these items began in FY97.
The JSLIST program developed and is fielding the JSLIST Overgarment and is manufacturing Multi-purpose Overboots (MULO). The JSLIST Overgarment and the Multipurpose Overboot (MULO) were adopted by all four services. These items, when combined with standard CB protective butyl gloves and masks for respiratory protection, allow complete MOPP flexibility. The Joint Firefighter Integrated Response Ensemble (J-FIRE) will also utilize the JSLIST overgarment.
The JSLIST overgarment is designed to replace the Battle Dress Overgarment, the USMC Saratoga, and the Navy Chemical Protective Overgarment. It is lighter and less bulky than the previous Battle Dress Overgarment (BDO) chemical protective garments, is durable for 45 days, can be laundered up to six times and provides 24 hours of protection against liquid and vapor chemical challenges. The overgarment consists of a coat and trousers. The trousers have bellows-type pockets, high-waist, adjustable suspenders, and adjustable waistband. The trousers also have a slide fastener front opening with protective flap and a bellows pocket with flap located on each thigh. Each leg opening has two hook and loop ankle adjustment tabs. The waist-length coat has an integral hood, a slide fastener front concealed by a flap with hook and loop closure, enclosed extendable elasticized drawcord hem with jacket retention cord, full-length sleeves with hoop and loop wrist closure adjustment tabs, and an outside bellows pocket with flap on the left sleeve. The outer shell of both pieces is a 50/50 nylon/cotton poplin ripstop with a durable water repellent finish. The liner layer consists of a nonwoven front laminated to activated carbon spheres and bonded to a tricot knit back. Garments are being procured in 4-color Woodland Camouflage or 3-color Desert Camouflage patterns.
Component Materials: The outer shell is a 50/50 nylon/cotton poplin ripstop with a durable water repellent finish. The liner layer consists of a nonwoven front laminated to activated carbon spheres and bonded to a tricot knit back.
Color: The outer layer is a 40 color Woodland Camouflage pattern or a 3-color Desert Camouflage pattern.
Weight: 2.63 kg (5.8 lbs) per overgarment (Med/Reg)
Size: Coat, 7 sizes, Small/X-Short through Large/Long; Trousers, 7 sizes, Small/X-Short through Large/Long
Basis of Issue: The overgarment will be issued to troops requiring chemical protection.
Price: Coat, Med/Reg $91.80; Trousers, Med/Reg $91.80
NSN: Coat, Med/Reg 8415-01-444-2310; Trousers, Med/Reg 8415-01-444-1238
The JSLIST suit has a five-year shelf life, with an estimated total life of 15 years. Once a production lot of suits has reached five years of age, samples from that lot are visually inspected and chemical agent tested to determine whether the shelf life of that lot should be extended an additional five years with sound confidence of quality / durability. Once the suit reaches ten years of service life it is chemical tested, inspected, and if qualified, is extended annually thereafter. Equipment Assessment Program personnel will perform the visual inspection. The chemical testing will be performed by the Battelle Memorial Institute. Inspection and testing of the JSLIST suits will begin in FY02 (first five year period) for shelf life extension. Representative samples from FY97 production lots will be inspected at that time.
JSLIST suits in packages with some loss of vacuum, but no clearly visible holes or tears, are considered fully mission-capable. If a bag is opened or accidentally torn, and has not been exposed to any petroleum, oil, or lubricant (POL) products or possible contaminants and not damaged in any way, it can be immediately re-packaged or carefully repaired with high quality adhesive tape, "duct tape", or some similar product to re-create the seal, and it will maintain its original shelf life. Repair procedures to the inner bag should not obliterate surveillance data. If a package is visibly torn or punctured with no determination as to when it was damaged or to what contaminants the suit was exposed, the suit should be used for training only. The words training only must be stenciled 2.5 inches high or larger on the outside of a sleeve or leg of the item, in a contrasting colored permanent ink.
The Multi-purpose Overboots (MULO) will replace the black vinyl overboot/ green vinyl overboot (BVO/GVO). The MULO is a 60 day boot that provides 24 hours of chemical protection. The boot has increased traction, improved durability, petroleum, oil, and lubricant (POL) and flame resistance, and better chemical protection than the BVO/GVO.
The focus of Joint Service Lightweight Integrated Suit Technology Pre-Planned Product Improvement (JSLIST P3I) is to leverage Industry for mature fabric technologies for use in garments. The existing JSLIST design will be used as the baseline, with minimum modification as necessary for improvement. Mature fabric technologies and designs for gloves and socks will be sought as well to address the glove and sock requirements that were not met in JSLIST.
A market survey was conducted in FY97. Materials received from responding forms were evaluated, and material screening was scheduled to be completed in 4FQ98. Field evaluation was projected to start 1QFY99, and technology insertion in 1QFY00.
The JSLIST P3I is a follow-on to the existing JSLIST program which developed a joint service chemical protective ensemble. It will address the JSLIST objectives (i.e. desired) requirements and those that were not met. This joint program will include full participation by the US Air Force, Army, Marine Corps, and Navy.
The JSLIST Block 1 Glove Upgrade (JB1GU) Program is seeking an interim glove to replace the current butyl rubber glove. The follow on to the JB1GU will be the JB2GU program that will be produce gloves for both ground and aviation units. The Joint Protective Aircrew Ensemble (JPACE) will be developed to provide aviators with the same advantages and improved protection as JSLIST provides to other warfighters. Similarly, clothing systems for Explosive Ordnance Disposal (EOD) personnel and firefighters are required to enhance existing chemical protection systems.
In an attempt to encourage competition and lower costs, the Joint Service Lightweight Integrated Suit Technology (JSLIST) program solicited in 4QFY00 for JSLIST overgarments in alternate materials, but having the exact same design as the original JSLIST. The purpose of the JSLIST Additional Source Qualification (JASQ) program is to qualify additional manufacturers to provide JSLIST overgarments. Manufacturers could also submit Industry Initiated Demonstration Products (IIDP) in alternate materials that might require a different design. These though will be evaluated for potential use in future garments and can not be qualified for use as a substitute JSLIST overgarment. After release of Request for Proposal in FY00, four candidate materials and two IIDP candidates were received. All have completed field-testing at 29 Palms, Cold Regions Test Center, and Tropic Test Center 4QFY01 – 2QFY02. Due to funding shortfalls, chemical agent swatch testing has been postponed until 1QFY03. Upon completion of agent testing, the candidates will be evaluated for inclusion on the Qualified Products List (QPL).
Suit shortages are projected to escalate in the next few years because the majority of suits in the current inventory will reach the end of their useful life and expire by 2007, and new Joint Service Lightweight Integrated Suit Technology (JSLIST) suits, along with other new generation protective ensemble components such as gloves and boots, are not entering the inventory as quickly as originally planned. Consequently, the old suits are expiring faster than they are being replaced.
Some ensemble components, particularly suits, may not be available in adequate numbers to meet near-term minimum requirements. As of August 30, 2002, DOD had procured about 1.5 million of the new JSLIST suits, of which the majority were issued to the military services. Others are held in Defense Logistics Agency reserves, provided to foreign governments under the Foreign Military Sales program, or allocated to domestic uses. Together with the existing inventory of earlier-generation suits, it was estimated that DOD had a total of 4.5 million suits.
|
|
David
Fri March 21, 2003 6:30am
|
M1A2 MBT
The mission of the M1A2 Abrams tank is to close with and destroy enemy forces using firepower, maneuver, and shock effect. The M1A2 is being fielded to armor battalions and cavalry squadrons of the heavy force. In lieu of new production, the Army is upgrading approximately 1,000 older M1 tanks to the M1A2 configuration. Going from the M1A1 to M1A2, the Army did several things that significantly reduced ballistic vulnerability, adding dual, redundant harnesses components, redundant data buses, distributing electrical power systems so all the power controls are not in one place.
During the Army's current M1A2 procurement program about 1,000 older, less capable M1 series tanks will be upgraded to the M1A2 configuration and fielded to the active forces. There is currently no plan to field the M1A2 to the ARNG. The Army has procured 62 new tanks in the A2 configuration and as of early 1997 completed the conversion of 368 older M1s to M1A2s. The first three years of M1A2 Abrams upgrade tank work, between 1991-1993, delivered 267 tanks. A multi-year procurement of 600 M1A2 upgrade tanks was run at Lima [Ohio] Army tank plant from 1996 to 2001.
Further M1A2 improvements, called the System Enhancement Program (SEP), are underway to enhance the tank's digital command and control capabilities and to to improve the tank's fightability and lethality. In FY 1999, the Army began upgrading M1s to the M1A2 System Enhancement Program (SEP) configuration. In 1994, the Army awarded a contract to General Dynamics Land Systems to design system enhancements to the M1A2, and awarded GDLS another contact in 1995 to supply 240 of the enhanced M1A2s, with delivery scheduled to begin in 1999. M1A2 SEP started fielding in 2000. It adds second generation forward looking infrared technology to the gunner's and commander's thermal sights. This sensor also will be added to older M1A2s starting in FY 2001.
A multi-year contract for 307 M1A2 Abrams Systems Enhancement Program (SEP) tanks was awarded in March 2001 with production into 2004. The current Army plan allows for a fleet of 588 M1A2 SEP, 586 M1A2 and 4,393 M1A1 tanks. The potential exits for a retrofit program of 129 M1A2 tanks to the SEP configuration between 2004 and 2005. Initial fielding of the M1A2 to the Army's 1st Cavalry Division, Fort Hood, Texas, was complete by August 1998. Fielding to the 3rd Armored Cavalry Regiment, Ft. Carson, Colorado ended in 2000. Fielding of the M1A2 (SEP) began in spring 2000 with the 4th Infantry Division, Fort Hood, Texas, and continues. Rolling over of the 1st Cavalry Division's M1A2 tanks to new M1A2 (SEP) tank began in 2001 and continues.
The M1A2 SEP (System Enhancement Package), is the digital battlefield centerpiece for Army XXI. It is the heavy force vehicle that will lead Armor into the next century and transition the close combat mission to the Future Combat System (FCS). The M1A2 SEP is an improved version of the M1A2. It contains numerous improvements in command and control, lethality and reliability. The M1A2 System Enhanced Program is an upgrade to the computer core that is the essence of the M1A2 tank. The SEP upgrade includes improved processors, color and high resolution flat panel displays, increased memory capacity, user friendly Soldier Machine Interface (SMI) and an open operating system that will allow for future growth. Major improvements include the integration of the Second Generation Forward Looking Infared (2nd Gen FLIR) sight, the Under Armor Auxiliary Power Unit (UAAPU) and a Thermal Management System (TMS).
Increased funding for Stryker and Future Combat Systems (FCS) came as a result of Army decisions in 2002 to terminate or restructure some 48 systems in the FY '04 - '09 Program Objective Memorandum (POM) long-term spending plan. Among the systems terminated were: United Defense's Crusader self-propelled howitzer and the A3 upgrade for the Bradley Fighting vehicle, GD's M1A2 Abrams System Enhancement Program, Lockheed Martin's Army Tactical Missile System Block II and the associated pre-planned product improvement version of Northrop Grumman's Brilliant Anti-armor (BAT) munition, Raytheon's Stinger missile and Improved Target Acquisition System, and Textron's Wide Area Mine.
The 2nd Generation Forward Looking InfraRed sighting system (2nd Gen FLIR) will replace the existing Thermal Image System (TIS) and the Commander's Independent Thermal Viewer. The incorporation of 2nd Gen FLIR into the M1A2 tank will require replacement of all 1st Gen FLIR components. From the warfighter perspective, this is one of the key improvements on the SEP. The 2nd Gen FLIR is a fully integrated engagement-sighting system designed to provide the gunner and tank commander with significantly improved day and night target acquisition and engagement capability. This system allows 70% better acquisition, 45% quicker firing and greater accuracy. In addition, a gain of 30% greater range for target acquisition and identification will increase lethality and lessen fratricide. The Commander's Independent Thermal Viewer (CITV) provides a hunter killer capability. The 2nd GEN FLIR is a variable power sighting system ranging from 3 or 6 power (wide field of view) for target acquisition and 13, 25 or 50 power (narrow field of view) for engaging targets at appropriate range.
The UAAPU consist of a turbine engine, a generator, and a hydraulic pump. The generator is capable of producing 6 Kilowatts of electrical power at 214 Amps, 28 vdc, and the hydraulic pump is capable of delivering 10 Kilowatts of hydraulic power. The UAAPU can meet the electrical and hydraulic power to operate all electronic and hydraulic components used during mounted surveilance operations and charge the tank's main batteries. The UAAPU will reduce Operational and Support cost by utilizing the same fuel as the tank at a reduced rate of 3-5 gallons per operational hour. The UAAPU is mounted on the left rear sponson fuel cell area and weighs 510 pounds.
Another improvement in the M1A2 SEP is the Thermal Management System (TMS) which keeps the temperature within the crew compartment under 95 degrees and the touch temperature of electronic units under 125 degrees during extreme conditions. By reducing the temperature in the crew compartment for the crew and electronic units, this increases the operational capability for both soldiers and the vehicle. The TMS consists of an Air Handling Unit (AHU) and a Vapor Compression System Unit (VCSU) capable of providing 7.5 Kilowatts of cooling capacity for the crew and Line Repairable Units (LRUs). The AHU is mounted in the turret bustle and the VCSU is mounted forward of the Gunner's Primary Sight (GPS). The TMS uses enviromentally friendly R134a refrigerant and propylene glycol/water mixture to maintain the LRU touch temperature at less than 140 degrees Fahrenheit. The TMS is mounted in the left side of turret bussel and weighs 384 pounds.
The Army requires that all systems operate in the Army Common Operating Environment (ACOE) to improve combined arms operations. Digitization and information dominance across the entire Army for tactical elements is accomplished using Force XXI Battle Command for Brigade and Below (FBCB2) software. In Abrams, FBCB2 software is hosted on a separate card that enables situational awareness across the entire spectrum of tactical operation. It improves message flow, through 34 joint variable message formats, reports ranging from contact reports to logistic roll ups, as well as automatically providing vehicle location to friendly systems. The SEP allows for digital data dissemination with improved ability to optimize information based operations and maintain a relevant common picture while executing Force XXI full dimensional operation. This enhancement increases capability to control the battlefield tempo while improving lethality and survivability. Finally to ensure crew proficiency is maintained, each Armor Battalion is fielded an improved Advanced Gunnery Training System (AGTS) with state-of-the-art graphics.
Changes to the M1A2 Abrams Tank contained in the System Enhancement Program (SEP) and "M1A2 Tank FY 2000" configuration are intended to improve lethality, survivability, mobility, sustainability and provide increased situational awareness and command & control enhancements necessary to provide information superiority to the dominant maneuver force. The Abrams Tank and the Bradley Fighting Vehicle are two central components of the dominant maneuver digital force.
System Enhancement Program upgrades are intended to:
improve target detection, recognition and identification with the addition of two 2nd generation FLIRs.
incorporate an under armor auxiliary power unit to power the tank and sensor suites.
incorporate a thermal management system to provide crew and electronics cooling.
increase memory and processor speeds and provide full color map capability.
provide compatibility with the Army Command and Control Architecture to ensure the ability to share command & control and situational awareness with all components of the combined arms team.
Additional weight reduction, embedded battle command, survivability enhancement, signature management, safety improvement, and product upgrade modifications to the M1A2 will comprise the "M1A2 Tank FY 2000" configuration fielded to units of the digital division beginning in FY 2000.
The M1A2 IOT&E was conducted from September-December 1993 at Fort Hood, TX and consisted of a gunnery phase and a maneuver phase. The Director determined that the test was adequate, the M1A2 was operationally effective, but not operationally suitable and unsafe. That assessment was based on poor availability and reliability of the tank, instances of the uncommanded tube and turret movement, inadvertent .50 caliber machine gun firing, and hot surfaces which caused contact burns.
FOT&E #1 was conducted in September-October 1995 in conjunction with the New Equipment Training for two battalion sized units. Despite assurances from the Army that all corrective actions were applied, numerous instances of uncommanded tube and turret movement, Commander's Independent Display (CID) lockup and contact burns continued during FOT&E #1. The follow-on test was placed on hold and the Army "deadlined" the two battalions of M1A2 tanks at Fort Hood for safety reasons. The PM isolated 30 "root causes" of the safety problems and completed hardware and software upgrades in June 1996 which were assessed in FOT&E #2.
The M1A2 TEMP was approved during 2QFY98. This TEMP includes a coordinated plan for FOT&E #3 of the M1A2 in conjunction with the IOT&E of the Bradley Fighting Vehicle in FY99 at Fort Hood, TX. This combined operational test will consist of 16 force-on-force battles between a Bradley Fighting Vehicle System-A3/M1A2 SEP combined arms team and M1A1/ Bradley-ODS combined arms team. Additionally, it will serve as the operational test for the 2d Generation FLIR. This approach implements the Secretary of Defense theme of combining testing in order to save resources and ensure a more realistic operational environment.
The Army and DOT&E completed vulnerability assessment efforts and concluded that the "M1A2 Tank FY 2000" is a significant change from the original M1A2 design and will require a system-level survivability evaluation. This evaluation will rely on full-up system level testing of two systems, component and sub-system level testing, modeling and simulation, existing data, and previous testing to assess susceptibility and vulnerability of the "M1A2 Tank FY 2000" and its crew to the expected threat and to assess battle damage repair capabilities.
The M1A2 Abrams Tank with the corrective actions applied by the Program Manager during FY96 is assessed to be operationally effective and suitable. The availability, reliability, fuel consumption, and safety problems observed in previous testing have been corrected. FOT&E #2 was adequately conducted in accordance with approved test plans and the Abrams TEMP. There were no observed instances of the uncommanded tube and turret movement, inadvertent .50 caliber machine gun firing, and hot surfaces which caused contact burns in previous testing.
The largest area of technical risk to the program is the development of the Embedded Battle Command software which is intended to provide friendly and enemy situational awareness and shared command & control information throughout the combined arms team. This software is being developed as a Horizontal Technology Insertion program and will be provided to the weapon systems and C2 nodes of the combined arms team in FY00. This development schedule is high risk and could adversely impact the M1A2 schedule.
In late 2002 the Army experienced a tragic accident involving the M1A2 Abrams main battle tank. While the crew of the M1A2 was operating the vehicle, a failure within the vehicle's Nuclear, Biological, Chemical (NBC) main system occurred which resulted in an NBC filter fire. One soldier died and 9 others received injuries. While there are numerous factors involved in this accident, the primary cause of the NBC Filter fire is an air cycle machine seizure, caused by dirt ingestion.
The M1A2 tank provides various warnings and cautions to crewmembers in the case of an NBC system problem. These warnings and cautions are displayed visually at the Commander's Integrated Display (CID) and at the Driver's Integrated Display (DID); additionally, an Audio tone is transmitted to each crewman via the Vehicular Intercommunication Set (VIS). The audio warning is generated from the tank's Analog Input Module (AIM) by way of the 2W119-5 wiring harness (Y-cable) which is connected to the driver's station, full-function, control box (AN/VIC 3). This Y-cable must be connected to the driver's control box at the J3 connector with the driver's CVC plugged into the P4 end of the Y-cable. Failure to properly hookup the 2W119-5 cable will not interfere with vehicle communications, but it will result in NO NBC warning tone being heard. In addition to the accident vehicle, several other M1A2 tanks at this installation were found to have the same incorrect connection. Commanders should ensure that each M1A2 in their command is inspected to ensure that this system is correctly connected. The NBC system should not be used until the inspection is complete.
If an NBC warning message is given (visually or audio), crews should immediately press NBC MAIN pushbutton on the CID to turn off the NBC main system. Continued use of the NBC main system will result in an NBC filter fire.
The NBC system is a critical component of the M1A2; it provides crews with increased protection when operating in a combat environment. This system requires proper servicing and checks as outlined in the technical manual. Ensure that all NBC sponson bolts and hardware are properly mounted and secure at all times. Failure to do so can result in the build up of dirt and dust within the NBC sponson box with the potential of damaging the Air Cycle Machine (ACM) and other components.
|
|
David
Fri March 21, 2003 6:30am
|
M1A2 MBT
The mission of the M1A2 Abrams tank is to close with and destroy enemy forces using firepower, maneuver, and shock effect. The M1A2 is being fielded to armor battalions and cavalry squadrons of the heavy force. In lieu of new production, the Army is upgrading approximately 1,000 older M1 tanks to the M1A2 configuration. Going from the M1A1 to M1A2, the Army did several things that significantly reduced ballistic vulnerability, adding dual, redundant harnesses components, redundant data buses, distributing electrical power systems so all the power controls are not in one place.
During the Army's current M1A2 procurement program about 1,000 older, less capable M1 series tanks will be upgraded to the M1A2 configuration and fielded to the active forces. There is currently no plan to field the M1A2 to the ARNG. The Army has procured 62 new tanks in the A2 configuration and as of early 1997 completed the conversion of 368 older M1s to M1A2s. The first three years of M1A2 Abrams upgrade tank work, between 1991-1993, delivered 267 tanks. A multi-year procurement of 600 M1A2 upgrade tanks was run at Lima [Ohio] Army tank plant from 1996 to 2001.
Further M1A2 improvements, called the System Enhancement Program (SEP), are underway to enhance the tank's digital command and control capabilities and to to improve the tank's fightability and lethality. In FY 1999, the Army began upgrading M1s to the M1A2 System Enhancement Program (SEP) configuration. In 1994, the Army awarded a contract to General Dynamics Land Systems to design system enhancements to the M1A2, and awarded GDLS another contact in 1995 to supply 240 of the enhanced M1A2s, with delivery scheduled to begin in 1999. M1A2 SEP started fielding in 2000. It adds second generation forward looking infrared technology to the gunner's and commander's thermal sights. This sensor also will be added to older M1A2s starting in FY 2001.
A multi-year contract for 307 M1A2 Abrams Systems Enhancement Program (SEP) tanks was awarded in March 2001 with production into 2004. The current Army plan allows for a fleet of 588 M1A2 SEP, 586 M1A2 and 4,393 M1A1 tanks. The potential exits for a retrofit program of 129 M1A2 tanks to the SEP configuration between 2004 and 2005. Initial fielding of the M1A2 to the Army's 1st Cavalry Division, Fort Hood, Texas, was complete by August 1998. Fielding to the 3rd Armored Cavalry Regiment, Ft. Carson, Colorado ended in 2000. Fielding of the M1A2 (SEP) began in spring 2000 with the 4th Infantry Division, Fort Hood, Texas, and continues. Rolling over of the 1st Cavalry Division's M1A2 tanks to new M1A2 (SEP) tank began in 2001 and continues.
The M1A2 SEP (System Enhancement Package), is the digital battlefield centerpiece for Army XXI. It is the heavy force vehicle that will lead Armor into the next century and transition the close combat mission to the Future Combat System (FCS). The M1A2 SEP is an improved version of the M1A2. It contains numerous improvements in command and control, lethality and reliability. The M1A2 System Enhanced Program is an upgrade to the computer core that is the essence of the M1A2 tank. The SEP upgrade includes improved processors, color and high resolution flat panel displays, increased memory capacity, user friendly Soldier Machine Interface (SMI) and an open operating system that will allow for future growth. Major improvements include the integration of the Second Generation Forward Looking Infared (2nd Gen FLIR) sight, the Under Armor Auxiliary Power Unit (UAAPU) and a Thermal Management System (TMS).
Increased funding for Stryker and Future Combat Systems (FCS) came as a result of Army decisions in 2002 to terminate or restructure some 48 systems in the FY '04 - '09 Program Objective Memorandum (POM) long-term spending plan. Among the systems terminated were: United Defense's Crusader self-propelled howitzer and the A3 upgrade for the Bradley Fighting vehicle, GD's M1A2 Abrams System Enhancement Program, Lockheed Martin's Army Tactical Missile System Block II and the associated pre-planned product improvement version of Northrop Grumman's Brilliant Anti-armor (BAT) munition, Raytheon's Stinger missile and Improved Target Acquisition System, and Textron's Wide Area Mine.
The 2nd Generation Forward Looking InfraRed sighting system (2nd Gen FLIR) will replace the existing Thermal Image System (TIS) and the Commander's Independent Thermal Viewer. The incorporation of 2nd Gen FLIR into the M1A2 tank will require replacement of all 1st Gen FLIR components. From the warfighter perspective, this is one of the key improvements on the SEP. The 2nd Gen FLIR is a fully integrated engagement-sighting system designed to provide the gunner and tank commander with significantly improved day and night target acquisition and engagement capability. This system allows 70% better acquisition, 45% quicker firing and greater accuracy. In addition, a gain of 30% greater range for target acquisition and identification will increase lethality and lessen fratricide. The Commander's Independent Thermal Viewer (CITV) provides a hunter killer capability. The 2nd GEN FLIR is a variable power sighting system ranging from 3 or 6 power (wide field of view) for target acquisition and 13, 25 or 50 power (narrow field of view) for engaging targets at appropriate range.
The UAAPU consist of a turbine engine, a generator, and a hydraulic pump. The generator is capable of producing 6 Kilowatts of electrical power at 214 Amps, 28 vdc, and the hydraulic pump is capable of delivering 10 Kilowatts of hydraulic power. The UAAPU can meet the electrical and hydraulic power to operate all electronic and hydraulic components used during mounted surveilance operations and charge the tank's main batteries. The UAAPU will reduce Operational and Support cost by utilizing the same fuel as the tank at a reduced rate of 3-5 gallons per operational hour. The UAAPU is mounted on the left rear sponson fuel cell area and weighs 510 pounds.
Another improvement in the M1A2 SEP is the Thermal Management System (TMS) which keeps the temperature within the crew compartment under 95 degrees and the touch temperature of electronic units under 125 degrees during extreme conditions. By reducing the temperature in the crew compartment for the crew and electronic units, this increases the operational capability for both soldiers and the vehicle. The TMS consists of an Air Handling Unit (AHU) and a Vapor Compression System Unit (VCSU) capable of providing 7.5 Kilowatts of cooling capacity for the crew and Line Repairable Units (LRUs). The AHU is mounted in the turret bustle and the VCSU is mounted forward of the Gunner's Primary Sight (GPS). The TMS uses enviromentally friendly R134a refrigerant and propylene glycol/water mixture to maintain the LRU touch temperature at less than 140 degrees Fahrenheit. The TMS is mounted in the left side of turret bussel and weighs 384 pounds.
The Army requires that all systems operate in the Army Common Operating Environment (ACOE) to improve combined arms operations. Digitization and information dominance across the entire Army for tactical elements is accomplished using Force XXI Battle Command for Brigade and Below (FBCB2) software. In Abrams, FBCB2 software is hosted on a separate card that enables situational awareness across the entire spectrum of tactical operation. It improves message flow, through 34 joint variable message formats, reports ranging from contact reports to logistic roll ups, as well as automatically providing vehicle location to friendly systems. The SEP allows for digital data dissemination with improved ability to optimize information based operations and maintain a relevant common picture while executing Force XXI full dimensional operation. This enhancement increases capability to control the battlefield tempo while improving lethality and survivability. Finally to ensure crew proficiency is maintained, each Armor Battalion is fielded an improved Advanced Gunnery Training System (AGTS) with state-of-the-art graphics.
Changes to the M1A2 Abrams Tank contained in the System Enhancement Program (SEP) and "M1A2 Tank FY 2000" configuration are intended to improve lethality, survivability, mobility, sustainability and provide increased situational awareness and command & control enhancements necessary to provide information superiority to the dominant maneuver force. The Abrams Tank and the Bradley Fighting Vehicle are two central components of the dominant maneuver digital force.
System Enhancement Program upgrades are intended to:
improve target detection, recognition and identification with the addition of two 2nd generation FLIRs.
incorporate an under armor auxiliary power unit to power the tank and sensor suites.
incorporate a thermal management system to provide crew and electronics cooling.
increase memory and processor speeds and provide full color map capability.
provide compatibility with the Army Command and Control Architecture to ensure the ability to share command & control and situational awareness with all components of the combined arms team.
Additional weight reduction, embedded battle command, survivability enhancement, signature management, safety improvement, and product upgrade modifications to the M1A2 will comprise the "M1A2 Tank FY 2000" configuration fielded to units of the digital division beginning in FY 2000.
The M1A2 IOT&E was conducted from September-December 1993 at Fort Hood, TX and consisted of a gunnery phase and a maneuver phase. The Director determined that the test was adequate, the M1A2 was operationally effective, but not operationally suitable and unsafe. That assessment was based on poor availability and reliability of the tank, instances of the uncommanded tube and turret movement, inadvertent .50 caliber machine gun firing, and hot surfaces which caused contact burns.
FOT&E #1 was conducted in September-October 1995 in conjunction with the New Equipment Training for two battalion sized units. Despite assurances from the Army that all corrective actions were applied, numerous instances of uncommanded tube and turret movement, Commander's Independent Display (CID) lockup and contact burns continued during FOT&E #1. The follow-on test was placed on hold and the Army "deadlined" the two battalions of M1A2 tanks at Fort Hood for safety reasons. The PM isolated 30 "root causes" of the safety problems and completed hardware and software upgrades in June 1996 which were assessed in FOT&E #2.
The M1A2 TEMP was approved during 2QFY98. This TEMP includes a coordinated plan for FOT&E #3 of the M1A2 in conjunction with the IOT&E of the Bradley Fighting Vehicle in FY99 at Fort Hood, TX. This combined operational test will consist of 16 force-on-force battles between a Bradley Fighting Vehicle System-A3/M1A2 SEP combined arms team and M1A1/ Bradley-ODS combined arms team. Additionally, it will serve as the operational test for the 2d Generation FLIR. This approach implements the Secretary of Defense theme of combining testing in order to save resources and ensure a more realistic operational environment.
The Army and DOT&E completed vulnerability assessment efforts and concluded that the "M1A2 Tank FY 2000" is a significant change from the original M1A2 design and will require a system-level survivability evaluation. This evaluation will rely on full-up system level testing of two systems, component and sub-system level testing, modeling and simulation, existing data, and previous testing to assess susceptibility and vulnerability of the "M1A2 Tank FY 2000" and its crew to the expected threat and to assess battle damage repair capabilities.
The M1A2 Abrams Tank with the corrective actions applied by the Program Manager during FY96 is assessed to be operationally effective and suitable. The availability, reliability, fuel consumption, and safety problems observed in previous testing have been corrected. FOT&E #2 was adequately conducted in accordance with approved test plans and the Abrams TEMP. There were no observed instances of the uncommanded tube and turret movement, inadvertent .50 caliber machine gun firing, and hot surfaces which caused contact burns in previous testing.
The largest area of technical risk to the program is the development of the Embedded Battle Command software which is intended to provide friendly and enemy situational awareness and shared command & control information throughout the combined arms team. This software is being developed as a Horizontal Technology Insertion program and will be provided to the weapon systems and C2 nodes of the combined arms team in FY00. This development schedule is high risk and could adversely impact the M1A2 schedule.
In late 2002 the Army experienced a tragic accident involving the M1A2 Abrams main battle tank. While the crew of the M1A2 was operating the vehicle, a failure within the vehicle's Nuclear, Biological, Chemical (NBC) main system occurred which resulted in an NBC filter fire. One soldier died and 9 others received injuries. While there are numerous factors involved in this accident, the primary cause of the NBC Filter fire is an air cycle machine seizure, caused by dirt ingestion.
The M1A2 tank provides various warnings and cautions to crewmembers in the case of an NBC system problem. These warnings and cautions are displayed visually at the Commander's Integrated Display (CID) and at the Driver's Integrated Display (DID); additionally, an Audio tone is transmitted to each crewman via the Vehicular Intercommunication Set (VIS). The audio warning is generated from the tank's Analog Input Module (AIM) by way of the 2W119-5 wiring harness (Y-cable) which is connected to the driver's station, full-function, control box (AN/VIC 3). This Y-cable must be connected to the driver's control box at the J3 connector with the driver's CVC plugged into the P4 end of the Y-cable. Failure to properly hookup the 2W119-5 cable will not interfere with vehicle communications, but it will result in NO NBC warning tone being heard. In addition to the accident vehicle, several other M1A2 tanks at this installation were found to have the same incorrect connection. Commanders should ensure that each M1A2 in their command is inspected to ensure that this system is correctly connected. The NBC system should not be used until the inspection is complete.
If an NBC warning message is given (visually or audio), crews should immediately press NBC MAIN pushbutton on the CID to turn off the NBC main system. Continued use of the NBC main system will result in an NBC filter fire.
The NBC system is a critical component of the M1A2; it provides crews with increased protection when operating in a combat environment. This system requires proper servicing and checks as outlined in the technical manual. Ensure that all NBC sponson bolts and hardware are properly mounted and secure at all times. Failure to do so can result in the build up of dirt and dust within the NBC sponson box with the potential of damaging the Air Cycle Machine (ACM) and other components.
|
|
Marissa
Wed March 26, 2003 8:34am
|
Spc. Bradley Rockett, 302
Spc. Bradley Rockett, 302 Military Police Company, Fort Hood, Texas, stand watch with his M249 Squad Assault Weapon on a security convoy at Camp Virginia, Kuwait, March 14, 2003. 302 MP Company is currently deployed as a part of Operation Enduring Freedom.
|
|
David
Sat January 3, 2004 9:03pm
|
Battledress Overgarment (
Function: Woodland camouflage-patterned garment worn in all environments when under imminent threat of a chemical attack and after chemical operations have been initiated.
Description: The Battledress Overgarment is a two-layer, two piece garment consisting of coat and trousers. The outer layer is a water repellant treated nylon/cotton twill and the inner liner is a polyurethane foam/nylon tricot laminate impregnated with activated charcoal. The hip-length coat has a stand-up collar and full length sleeves with hook and loop wrist adjustment tabs. Each sleeve has an outside, one-sided bellows pocket with flap positioned below an inner atropine pocket. The coat has two side-opening chest pockets, a slide fastener front closure with intermittent fastener tapes and an enclosed, elasticized drawcord hem. The trousers have a slide fastener front opening with protective flap, two bellows pockets with flaps located at the thigh, two hip pockets with flaps, waist adjustment buckles and straps, suspender loops and belt loops. Each leg opening has a slide fastener at the outseam to control the adjustment opening and a drawcord in the hem. The overgarment is worn with a chemical protective mask with butyl hood, butyl gloves and liners, and chemical protective overboots to complete the chemical protective ensemble.
|
|
David
Sat January 3, 2004 9:03pm
|
M40/42 Protective Mask
Function: Provide respiratory, eye and face protection against chemical and biological agents, radioactive fallout particles, and battlefield contaminants.
Entered Army Service: 1992.
Description: The M40-series protective masks replace the M17-series protective mask as the standard Army field mask, providing improved comfort, fit and protection. The mask consists of a silicone rubber face piece with an in-turned peripheral face seal, binocular rigid eye lens system and elastic head harness. Other features include front and side voicemitters allowing better communication particularly when operating FM communications, drink tube for a drinking capability while being worn, clear and tinted inserts, and a filter canister with NATO standard threads. Because of these features, the mask can be worn continuously for 8 to 12 hours.
The face-mounted canister (gas and aerosol filter) can be worn on either the left or the right cheek, and will withstand a maximum of 15 nerve, choking, and blister agent attacks. It will also withstand a maximum of two blood agent attacks. Biological agents do not degrade the filter.
The M40A1 is the mask issued to dismounted soldiers. It is available in small, medium, and large sizes.
The M42A2 Combat Vehicle Crewman Mask has the same components as the M40A1 with an additional built-in microphone for wire communication. The filter canister is attached to the end of the hose with an adapter for the CPFU connection.
The M45 Protective Mask, issued to Blackhawk crew members, provides protection without the aid of forced ventilation air. It is compatible with aircraft sighting systems and night vision devices. It has close fitting eyepieces, a voicemitter, drink tube, and a low profile filter canister.
The M48 and M49 masks, issued to Apache aviators, are an upgrade of the M43 Type I mask. Their improved blower is chest-mounted, lighter, less bulky, and battery powered.
Several mask improvements have been introduced over the years through Pre-Planned Product Improvement (P3I) Programs, which resulted in M40A1 and M40A2 configurations. The improvements include a quick-doff hood, second skin, canister interoperability (M42A1 only), and voice amplification (M7), new nosecup, two new carriers, and improved vision correction. An additional product improvement was adopted in late 1994, which upgraded the M42 to the M42A2 configuration. This change provides a detachable microphone that improves reliability, simplifies production, and permits field replacements.
General Characteristics, M40/42 Protective Mask
Contractor:
ILC Dover (Frederica, Delaware)
|
|
David
Mon October 11, 2004 8:55am
|
3 ASOG, Fort Hood, TX.
3 ASOG, Fort Hood, TX.
|
|
Keith_Hixson
Tue September 12, 2006 7:53pm
Rating: 8
|
Mount Hood, Oregon
Mt. Hood, Oregon
|
|
|
The Patriot Files Forums
